Kodowanie - modyfikacje

Wszystkie tematy związane z Volkswagenem T-Roc - zakup, eksploatacja, problemy itd.
MarioMc
Posty: 86
Rejestracja: 15 paź 2018, 20:04

Kodowanie - modyfikacje

Post autor: MarioMc »

Poniżej działające modyfikacje ze strony OBDeleven

UWAGA - wszystkie zmiany robicie na własne ryzyko i odpowiedzialność. Przypadkowa zmiana parametrów w części modułów może unieruchomić auto, pozbawić funkcjonalności wyposażenia, oraz ma bezpośredni wpływ na bezpieczeństwo!!!
Jeżeli nigdy nie robiłeś takich rzeczy - nie ryzykuj.


Module 08 Air conditioning

Display the fan speed also in AUTO mode (only for those with climatronic) (VIDEO)
Module 08 (Air conditioning)
Security access -> ? (should not be requested)
Long Coding (Text mode) - Blower display in auto operation -> Activated

Module 09 - (Central Electrics)

Activation opening/closing sound:
Module 09 (Central Electrics)
Security access -> 31347
Adaptation
Submenu - Acknowledgement Signals
- Akustische Rueckmeldung global -> active
- Akustische rueckmeldung entriegeln -> active (bip clacson when open)
- Akustische rueckmeldung verriegeln -> active (double bip clacson when close)
- Menuesteuerung Akustische rueckmeldung -> active (option active/disable sound in menù radio)

OEM alarm:
Module 09 (Central Electrics)
Long coding - Byte 12
- Activate Bit 0 (Anti-theft system installed / activated)
Adaptation
submenu - Anti-theft protection
- DWA Alarmverzoegerung -> "Driver door contact thatcham
- DWA Camper Modus -> On
- Ueberwachung Innenentriegelungshelbel -> On
- Akustischer Alarm Signalhorn -> On
- Diebstahlwarnanlage -> On
Submenu - Acknowledgement Signals
- Akustische Rueckmeldung global -> on
- Akustische Rueckmeldung Signalhorn -> on

It only activates if they try to open any of the doors, gate, bonnet of the car. It is not volumetric.


Automatic High Beam (Only for T-Roc with LED package and front camera) (VIDEO) (VIDEO)
Module 09 Electrics Central
Security Access >31347
Adaptation
Submenu - Fernlicht_assistent
- Erweiterte_Fernlichtsteuerung -> AFS, FLA, Fernlicht ueber AFS
- Menuesteuerung Fernlichtassistent -> present

Module A5 (Front sensors driver assistance system)
Long coding, Byte 21, enable Bit 5 (Light assist (AFS) High beam assist)

Activation of multicolored radio displays and radio menu. Ambient lights (VIDEO)

Module 09 (Central Electrics)
Security access -> 31347
Adaptation
Submenu - Int. Light, 2nd generation
- Instrumententafelbeleuchtung mehrfarbig -> active (ability multicolored displays)

Submenu - Interior light, light configuration
- Ambientemenue mit globalem aus -> active (adds the OFF button to turn off feet and door lights)
- Ambientemenue mit alle Zonen -> active (enable the Soft Lights menu)
- Ambient_Farbliste_HMI -> active (enables the submenu to set the colors)

Submenu - Ambientelicht Farbliste (this activates the first 10 colors)
- Rotwert Farbe 1 -> 217 (White)
- Gruenwert Farbe 1 -> 221
- Blauwert Farbe 1 -> 235
- Rotwert Farbe 2 -> 169 (Grey)
- Gruenwert Farbe 2 -> 169
- Blauwert Farbe 2 -> 169
- Rotwert Farbe 3 -> 253 (orange)
- Gruenwert Farbe 3 -> 108
- Blauwert Farbe 3 -> 55
- Rotwert Farbe 4 -> 242 (Red)
- Gruenwert Farbe 4 -> 0
- Blauwert Farbe 4 -> 40
- Rotwert Farbe 5 -> 254 (Pink)
- Gruenwert Farbe 5 -> 88
- Blauwert Farbe 5 -> 240
- Rotwert Farbe 6 -> 124 (Violet)
- Gruenwert Farbe 6 -> 63
- Blauwert Farbe 6 -> 190
- Rotwert Farbe 7 -> 0 (Blue)
- Gruenwert Farbe 7 -> 102
- Blauwert Farbe 7 -> 255
- Rotwert Farbe 8 -> 0 (light blue)
- Gruenwert Farbe 8 -> 204
- Blauwert Farbe 8 -> 255
- Rotwert Farbe 9 -> 0 (dark green)
- Gruenwert Farbe 9 -> 204
- Blauwert Farbe 9 -> 0
- Rotwert Farbe 10 -> 136 (light green)
- Gruenwert Farbe 10 -> 255
- Blauwert Farbe 10 -> 57

You can also put the RGB color codes (Rotwert-Gruenwert-Blauwert) that you like best in the 10 available slots.
After changing the colors, hold down the radio power button for 10 seconds and wait for the restart.
in Adaption TUBE VERSION must be: version 0,2,3 with version 1 the color in AID don't work

Module 17 - (Instruments)

Digital instrument panel look change (AID display) (VIDEO)
Module 17 Instruments
Security Access > 47115
Adaptation
Submenu - Tube_version (0 to F)

Lap Counter function (AID display) (VIDEO)
Module 17 - Instrument panel -
secure access > 25327)
Long coding
Byte 1 - activate Bit 3

Deactivate seat belt warning
Module 17 Instruments
Security Access > 47115
Adaptation
Submenu - Deactivate seat belt warning -> yes

Refueling Gasoline Amount (for petrol engines) (VIDEO)
Module 17 Instruments
Security Access > 47115
Long Coding - Byte 10 -> Bit 4 active (Refueling gasoline amount in DIS)

Change Max Speed Km/h (VIDEO)
Module 17 Instruments
Security Access > ?
Adaptation
Submenu - Speedometer -> Variant 0 (260Km/h), 2 (240Km/h), 3 (300Km/h)

Module 19 - (Gateway)

Start & Stop deactivation
Module 19 Gateway
Security Access > 20103
Adaptation
Submenu - Start/stop start voltage limit -> 12 V (Default 7.6 V)

The Start & Stop function is deactivated permanently and the button you have next to the gearbox will then no longer be of any use.

Module 5F Information Control Unit (Radio)

Menù offroad (VIDEO)
This mod works with or without a navigator, but the altitude and the compass only work if you have the Media Discor or Pro, if you have Composition Media you can still view water temperature, oil and steering angle.
If you have Composition Media this change will indicate an error in the 5F (Control module incorrect coded U101400) module, but no error will be displayed on the radio screen.

Module 5F - Electronic Information
Security access -> 20103
Long Coding (Text mode) - Byte_24_Navigation_System -> On (se avete il NAVI dovrebbe già essere attivo)
Adaptation
Submenu - Car_Function_Adaptations_Gen2
- menu_display_compass -> active
- menu_display_compass_over_threshold_high -> active
- menu_display_angle_of_slope -> active
- menu_display_angle_of_slope_over_threshold_high -> active
Submenu - Car_Function_List_BAP_Gen2
- compass_0x15 -> active
- angle_of_slope_0x24 -> active

Module A5

Traffic sign recognition
this change with the media composition does work but there is a message of limit read sign

Module 17 Dash Board
Security Access > 47115
Long Coding - Byte 5 Bit 2 active (Traffic Sign Recognition Installed)

Module 5F Information Control Unit (Radio)
Security Access > 20103
Adaptation
Submenu - Car_Function_Adaptions_Gen2
- menu_display_road_sign_identification -> active
- menu_display_road_sign_identification_over_thresho ld_high -> active
Submenu - Car_Function_List_BAP_Gen2
- traffic_sign_recognition_0x21 -> active
- traffic_sign_recognition_0x21_msg_bus -> Data Bus Infotainment

Module A5 Front Sensors Driver Assistance System
Security access - 20103
Long Coding - Byte 16 Bit 4 active (Traffic sign recognition VZE)

Restart the Infotainment by pressing and holding the power button between 10s to 15s and release.
It should work already. In the settings of the driving assistants, the option 'Signal recognition' should appear and the speed signals appear in the frame.

Vibration Lane Assist in menù (VIDEO)
Module A5 (Front Sensors ...)
security access -> 20103
Long Coding - Byte 13 -> bit 1 & 2 active


Read more: http://forum.obdeleven.com/thread/5933/ ... z5txsEK8XW
Zam 12.10.2018 - Odbiór 12.07.2019
1.5 TSI DADA DSG Premium/17"/Pakiet Komfort/Drogowy/Sport/Siedzenia komfort/Podgrzewana Tiptronic/Park Assist/Rear Assist/El Bagaznik/Keyless Full/Phone Comfort/Beats.
Pado
Posty: 594
Rejestracja: 21 maja 2019, 21:14

Re: Kodowanie - modyfikacje

Post autor: Pado »

Właśnie zrobiłem modyfikacje:
- start stop OFF
- klima w automacie pokazuje prędkość wentylatora (bo diody z prędkością się nie paliły)
- wyłączyłem sygnał niezapiętych pasów
- włączyłem opcję ile L paliwa do zatankowania
- zmieniłem zakres zegarów do 240km/h...update:musialem wrocic do wersji 260km/h bo przy werdji 240 wsakzowka stała w miejscu!
- włączyłem menu OFFRoad

kolejne mody będą na pewno...m.in zmiana kolorów wyświetlacza
Pado
Posty: 594
Rejestracja: 21 maja 2019, 21:14

Re: Kodowanie - modyfikacje

Post autor: Pado »

Zmiana kolorów AID aktywna...
IMG_20191201_141421_compress32.jpg
IMG_20191201_141421_compress32.jpg (85.24 KiB) Przejrzano 22838 razy
Pado
Posty: 594
Rejestracja: 21 maja 2019, 21:14

Re: Kodowanie - modyfikacje

Post autor: Pado »

Dziejsze mody:
- dzienne świecą w pozycji auto, w pozycji 0 nie świecą zadne światła (w końcu zero to zero!)
- lusterka nie składają się z automatu po zamknięciu drzwi - trzeba przytrzymac rękę przy klamce 2sek lub dłużej przycisnąć zamykanie na pilocie.
- leaving home działa z automatu lo wyjściu z auta
- kierunkowskazy migaja 5 razy a nie 3 przy "muśnieciu" dźwigni...


Jestem ciekaw czy ruszy funkcja zamykania szyb jak pada... Ale chyba nie, podobno jest inny sensor...
Tiggy
Posty: 160
Rejestracja: 14 lut 2019, 8:01

Re: Kodowanie - modyfikacje

Post autor: Tiggy »

Pado pisze: 02 gru 2019, 22:16 - lusterka nie składają się z automatu po zamknięciu drzwi - trzeba przytrzymac rękę przy klamce 2sek lub dłużej przycisnąć zamykanie na pilocie.
To jest rewelacja - strasznie mnie wkurza wachlowanie lusterkami przy każdym otwarciu/zamknięciu.
Pado
Posty: 594
Rejestracja: 21 maja 2019, 21:14

Re: Kodowanie - modyfikacje

Post autor: Pado »

Tiggy pisze: 02 gru 2019, 22:31
Pado pisze: 02 gru 2019, 22:16 - lusterka nie składają się z automatu po zamknięciu drzwi - trzeba przytrzymac rękę przy klamce 2sek lub dłużej przycisnąć zamykanie na pilocie.
To jest rewelacja - strasznie mnie wkurza wachlowanie lusterkami przy każdym otwarciu/zamknięciu.
zgadza się- codziennie gdzieś na chwile podjeżdżam i lusterka chodzą non stop . Dodatkowo -sytuacja bardzooo rzadka, jeśli są marznące opady to szkoda silników na mocowanie się z lodem. Ale to mi się może ze dwa razy w życiu zdarzyło...
Pado
Posty: 594
Rejestracja: 21 maja 2019, 21:14

Re: Kodowanie - modyfikacje

Post autor: Pado »

kolejna modyfikacja to zwiększenie "siły" asystenta pasa (chodzi o mocniejszą siłę korekty przez kierownicę)
Są trzy ustawienia: słabo, średnio, mocno
gregor36
Posty: 73
Rejestracja: 18 lis 2018, 12:19

Re: Kodowanie - modyfikacje

Post autor: gregor36 »

Pado pisze: 11 gru 2019, 18:22 kolejna modyfikacja to zwiększenie "siły" asystenta pasa (chodzi o mocniejszą siłę korekty przez kierownicę)
Są trzy ustawienia: słabo, średnio, mocno
Możesz podawać w jakich opcjach dokonujesz zmian
1.5 TSI Premium,manual
Pado
Posty: 594
Rejestracja: 21 maja 2019, 21:14

Re: Kodowanie - modyfikacje

Post autor: Pado »

gregor36 pisze: 11 gru 2019, 21:05
Pado pisze: 11 gru 2019, 18:22 kolejna modyfikacja to zwiększenie "siły" asystenta pasa (chodzi o mocniejszą siłę korekty przez kierownicę)
Są trzy ustawienia: słabo, średnio, mocno
Możesz podawać w jakich opcjach dokonujesz zmian
Moduł A5, Adaptacje, warning intensity, lane depart.warning, >>>strong
adalbert68
Posty: 21
Rejestracja: 15 lut 2019, 22:39
Lokalizacja: Skoczów

Re: Kodowanie - modyfikacje

Post autor: adalbert68 »

Czy można dokonać takiej modyfikacji, aby na wyświetlaczu pokazanym na zdjęciu zamienić miejscami zasięg z prędkością? Praktyczniejszy jest widok wskazania prędkości większą czcionką w środku koła licznika , a zasięg może być mniejszymi cyferkami na dole.
Załączniki
20191215_150057.jpg
20191215_150057.jpg (253.36 KiB) Przejrzano 22587 razy
VW T-ROC 2.0 TSI Premium z paroma dodatkami :)
ODPOWIEDZ